Set the charging order before you place your devices
The Anker 3-in-1 Cube with Qi2 and Anker 140W 2-in-1 USB-C to USB-C Cable is a compact charging setup for a phone and earbuds. To use it smoothly, decide the order in which you place your devices and connect the cable. That way you avoid moving devices around after charging starts.
The catalog for this bundle does not list port-by-port power output, supported wireless standards beyond Qi2, or device-specific charging times. The steps below focus on what the supplied information confirms and on practical habits that do not depend on missing specifications.
A simple charging sequence for the cube and cable
Treat the cube as the base for your phone and earbuds, and the cable as the link to your power source. The exact placement of each device depends on the cube's physical design, which the supplied record does not describe in detail.
- Place the cube on a stable surface: Choose a flat spot near an outlet. Keep the cube still while you place devices on it, so you are not adjusting alignment later.
- Connect the 140W USB-C to USB-C cable: Plug the cable into the cube and into a compatible power source. The supplied record does not specify a required wall charger wattage, so use a charger you already trust for your devices.
- Place your iPhone on the Qi2 charging area: Qi2 is the wireless charging standard named in the product title. Align the phone with the charging surface according to the cube's markings or shape.
- Add your AirPods: If the cube has a dedicated earbuds position, place the case there after the phone is settled. The catalog does not confirm a separate earbuds coil or its output, so check the cube's own labeling for the correct spot.
- Check that both devices show charging: Look for the charging indicator on each device. If one does not respond, reseat it rather than stacking devices or forcing alignment.
What the catalog confirms about this bundle
- 3-in-1 Cube with Qi2 and Anker 140W 2-in-1 USB-C to USB-C Cable: The product is the 3-in-1 Cube with Qi2 and Anker 140W 2-in-1 USB-C to USB-C Cable. This tells you the bundle combines a Qi2 wireless charging cube with a high-wattage USB-C cable, so you can plan one cable run to the cube.

3-in-1 Cube with Qi2 and Anker 140W 2-in-1 USB-C to USB-C Cable - 3-in-1 Cube with Qi2 and Anker 140W 2-in-1 USB-C to USB-C Cable: The catalog price is USD 88.31, compared with a catalog comparison price of USD 127.98. If you are deciding whether to buy the bundle, the listed comparison price gives you a reference point, though prices can change.
- 3-in-1 Cube with Qi2 and Anker 140W 2-in-1 USB-C to USB-C Cable: The available variant is listed as Standard. There is one option shown in the supplied record, so you do not need to choose between color or configuration variants based on this evidence.
Charging order when you need both devices ready
The cube is described as 3-in-1, but the supplied record does not confirm which three device types it supports or how power is divided among them. Use the order below as a practical routine, not a manufacturer instruction.
- Phone first if you need it most: Place the iPhone on the Qi2 surface before adding earbuds. That keeps the phone aligned while you are still paying attention to placement.
- Earbuds first if the case is nearly empty: If your AirPods case has very little charge, set it on its charging spot first, then place the phone. The catalog does not state charge times, so check the case's own indicator.
- Avoid moving devices mid-charge: Once both are charging, leave them in place. Repositioning can interrupt wireless charging and make it harder to tell whether a device is actually charging.
Getting the most from the 140W USB-C to USB-C cable
The cable is rated at 140W in the product name. That rating describes the cable, not the power the cube delivers to each device. The supplied record does not confirm the cube's output wattage or whether it uses the cable's full capacity.
- Use the cable for the cube's power input: Keep the 140W cable dedicated to the cube so you are not swapping cables and losing track of which one supports higher wattage.
- Match the cable to a compatible charger: The cable can only carry what your power source supplies. The catalog does not list a required charger, so use one that fits your devices and outlet setup.
- Check the connection at both ends: If charging does not start, reseat the USB-C connectors at the cube and at the power source before assuming a device problem.
- Keep bends gentle: The supplied record does not give a bend radius or durability rating. As a general habit, avoid sharp folds near the connectors and do not pull the cable by the cord.
What to verify before you rely on this setup
The supplied record does not include a full specification list, setup instructions, or device compatibility table. Before you buy or set up the cube, confirm on the product page or packaging that your iPhone model supports Qi2 wireless charging and that your AirPods case supports wireless charging. Also check whether the cube includes its own power adapter, because the catalog does not confirm that detail.
If you need exact charging times or port-by-port power output, treat those as unconfirmed by the supplied information. Use the device indicators and your own routine to judge whether the setup meets your needs.

